^ZULU Code The Wikipedia of Ship Machinery

Maintenance Schedule — KE35

^Z S E M M

← Back to ^FABK — KE35

Maintenance Schedule

JobIntervalTypeSource
Chemical injection pump (Tacmina PZD) - inspect tank, joints and pump parts 3 months inspect Maker
Chemical injection pump (Tacmina PZD) - replace consumables (valve seats, check balls, O-rings, diaphragms) 10,000 h replace Maker
Condenser - cooling pipes: check end erosion and scaling, rinse 8,000 h inspect Maker
Condenser - cooling pipes: check end erosion and scaling, rinse 12 months inspect Maker
Condenser - inspect water box coating, repair pinholes 12 months inspect Maker
Condenser - inspect water box coating, repair pinholes 8,000 h inspect Maker
Condenser - tube plate: check flaws and erosion 12 months inspect Maker
Condenser - tube plate: check flaws and erosion 8,000 h inspect Maker
Condenser - water box corrosion bar: inspect, replace as necessary 2,000 h inspect Maker
Condenser - water box corrosion bar: inspect, replace as necessary 3 months inspect Maker
Distillate pump - O-rings: inspect or replace 12 months inspect Maker
Distillate pump - O-rings: inspect or replace 8,000 h inspect Maker
Distillate pump - casing ring clearance check (limit 1.2 mm) 8,000 h check Maker
Distillate pump - casing ring clearance check (limit 1.2 mm) 12 months check Maker
Distillate pump - clean and inspect impeller 8,000 h inspect Maker
Distillate pump - clean and inspect impeller 12 months inspect Maker
Distillate pump - mechanical seal: inspect or replace 12 months inspect Maker
Distillate pump - mechanical seal: inspect or replace 8,000 h inspect Maker
Evaporator - deflector and mesh separator: inspect, rinse scale 8,000 h inspect Maker
Evaporator - deflector and mesh separator: inspect, rinse scale 12 months inspect Maker
Evaporator - inspect coating surface 8,000 h inspect Maker
Evaporator - inspect coating surface 12 months inspect Maker
Feed water orifice - clean and confirm inside diameter 8,000 h clean Maker
Feed water orifice - clean and confirm inside diameter 12 months clean Maker
Heater - inspect bottom lid coating, repair pinholes 12 months inspect Maker
Heater - inspect bottom lid coating, repair pinholes 8,000 h inspect Maker
Heater - rinse inside of heater pipes (descale) 4,000 h clean Maker
Heater - rinse inside of heater pipes (descale) 6 months clean Maker
Salinity indicator - clean cell (electrode) 1 months clean Maker
Sight glass - clean 6 months clean Maker
Sight glass - clean 4,000 h clean Maker
Water ejector - inspect/clean nozzle and diffuser, replace if worn 12 months inspect Maker
Water ejector - inspect/clean nozzle and diffuser, replace if worn 8,000 h inspect Maker

Information received from various sources and contributors.